Ask Experts Questions for FREE Help !
Ask
    geniejm's Avatar
    geniejm Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 4, 2011, 07:45 AM
    Master bath and shower issue
    Hi, It has been recently colder than normal in Texas. Every sink and shower has running hot and cold water running except the master bathtub and shower. The tub is the only one that has running cold water no hot water (it only trickles) and the shower doesn't run any water at all. Could the issue be a frozen pipe? It was running perfect the day before. We turned off the main water encase it was a pipe and have a brand new water heater. Help what can the issue be??
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Feb 4, 2011, 08:34 AM

    Are the valves to the tub and shower in an exterior wall?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Feb 4, 2011, 09:49 AM

    If you get a trickle of hot just let it run for 15 monutes. If it was a frozen pipe it will be flowing. If no flow then a clogged hot inlet in the valve or stop
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Master shower issue [ 1 Answers ]

Lose of water pressure in the master shower. Single handle model. Water pressure is fine in the house.

What is a stacking issue in the bath-shower [ 6 Answers ]

What is a stacking issue in the shower.water comes out of both the showerhead and tub spout.I was told it could be the deverter,its not.I was also told it was a stacking issue because my house is plumed from the ceiling down and I need to loop it so it comes from the bottom up.I don't understand...

Adding master bath to 1 bath home [ 2 Answers ]

I am looking to add a master suite and bathroom to a 2 bed 1 bath slab home. The existing bath is behind a wall adjacent to the space where I will add the bath. My main concern is how I tie into the drain lines. I assume I will have to chip the slab or is there a way to elevate the toilets and tie...

No pressure in master bath shower [ 1 Answers ]

In the master bath shower we have very little pressure but in the other bath there is lots of pressure. The fixtures in the shower are old could this be the problem. HELP!!

View more questions Search