Ask Experts Questions for FREE Help !
Ask
    jakedbe's Avatar
    jakedbe Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 2, 2011, 03:15 PM
    Thermostat
    My old Honeywell only has two wires, a red hooked to "R" and a yellow hooked to "W".
    My new Hunter has a red jumper, do I need it. And where do my wires go? I have no central air unit, Just my new furnace,

Check out some similar questions!

Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat. [ 4 Answers ]

I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...

Goodman furnace guso50-2 thermostat wiring instructions for 2 wire thermostat [ 2 Answers ]

Looking to hook up a 2 wire heat only thermostat as the door with the weiring diagram is missing it's a goodman guso50-2?

Replacing maple chase thermostat with ritetemp thermostat model # 6030 [ 0 Answers ]

Replacing maple chase thermostat with ritetemp thermostat model # 6030

How do you bypass a honeywell basic programmable thermostat to run a/c until bad thermostat is replaced [ 2 Answers ]

Just a quick question.

Replacing Trane Thermostat BAYSTAT240 with Thermostat LENNOX 81M28 [ 3 Answers ]

Hello Currently I got the Trane Thermostat BAYSAT240 controlling my Furnace - Heat Pump Combo My setup is almost the same as described in the posting called: Wiring Thermostat Honeywell 8320U to Furnace-heat pump Trane XE78+XE1000 Combo Except that I control everything from one Thermostat ...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.