The water pressure stopped working altogether for my bath, works everywher else

Check out some similar questions!

Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 14 Answers ]

New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:

Pressure regulator works okay, but with water off, has very high back pressure [ 4 Answers ]

I went to check my home's water pressure. When I did this, it read off the charts at 100psi. Adjusting the pressure regulator did nothing apparent. But in the shower, the adjustment definitely had an affect - even thought he pressure meter didn't show a change. I tried a second pressure meter...

Wireless keyboard stopped working, mouse still works... [ 9 Answers ]

Installed new wireless keyboard, Logitec (one of the lower cost ones). Worked fine for a while, then recently, all typing using the letter/number section of the board stopped working. But the special keys on the outer edge, that open word documents etc. still work, and the mouse works fine. Any...

Buderus gas water heater - low water light on & stopped working after 3 months [ 1 Answers ]

Hello! We had a Buderus gas water heater installed in October 2008 (for both hot water and heating). It worked fine until a few weeks ago, when it stopped working suddenly, and the sensor showed that there wasn't enough water (low water light was on); after a couple of hours (or less), it...

No hot water in the bath tubes but works every where else [ 1 Answers ]

Hello, I am a first time home owner and not all too familiar with plumbing... Recently the hot water quit working in the master bath... So we then we started taking showers in the spare bathroom for about a week and then the hot water just quit working in that bathtub as well. We do get...

View more questions Search

Check out some similar questions!

Add your answer here.