Why won't unit come on pilot is on and fan works no heat

Check out some similar questions!

HVAC Split Unit Heat works fine, A/C compressor on fan off [ 10 Answers ]

Hello all. I certainly have found a TON of info on this site, and problems that sound just like mine, but solutions seem to point to different things than in my system. So I apologize in advance if this is a duplicate somebody already answered. I have an older Ducane Oil Furnace converted to...

Fan works and then stops and my outside air unit gets hot [ 7 Answers ]

I have a unit that is a Janitrol and is about 15 yrs old. I just had a new compressor put in but the unit stopped blowing cold air after a day. The man came back and found two leaks that caused all the freon to leak out. He fixed the leaks and put more gas in it. He has not been gone for a...

Fan works, breaker is on, pilot is on. No heat [ 3 Answers ]

When I move thermostat to heat nothing happens no usual click from the furnace. Fan works checked breaker pilot is on.What is the part in the furnace that the thermostat turns on to start the heat and or what else could this be

Fan works - AC unit does not [ 1 Answers ]

I attempted to turn on my AC unit today for the first time this season. Fan was set to AUTO. Nothing came on. Circuit breaker was not tripped. I turned the fan to ON and the fan works. AC unit still does not work.

Gas Furnace / AC unit fan works. Heat/AC do not [ 2 Answers ]

This winter the furnace control board in my Lennox Gas Furnace / AC unit failed and I had it replaced by a contractor. The contractor mis-wired the thermostat inputs to the board. He wired the Green (fan) wire to the C (compressor connection) board input and the C wire to the Green (fan) board...

View more questions Search

Check out some similar questions!

Add your answer here.