Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do you replace stem assembly
[ 10 Answers ]
I need to replace a symmons shower faucet stem assembly, part # TA-10. Do I need a Plumber or can I do it myself.
How do I replace kitchen faucet sprayer with a undersink water filter faucet?
[ 1 Answers ]
I have a old kitchen kitchen faucet with attached sprayer. I want to install a Culligan undersink filter which comes with a water faucet that REPLACES the sprayer. I have very limited room under the sink to work in. I cannot even get any normal open end wrenches/adjustibles to work with limited...
Broken hot water stem under kitchen faucet
[ 1 Answers ]
In attempting to replace the water line for the hot water to the kitchen faucet, I broke the stem off the valve. My problem is that I can't identify how to shut off the hot water flow to this point so that I could disassemble the valve in order to replace the stem. Where can I look for a valve or a...
How do you replace a kitchen faucet?
[ 5 Answers ]
Can I just get under the sink and unscrew it with a regular tool or do I need to buy something specific? Am I going to have to take out the entire sink? That seems to be a very difficult thing to do, how does one remove a sink and then put it back? Can't I just lie under the sink and do it that...
Pressure drop after replace new kitchen faucet
[ 1 Answers ]
I just replaced the Moen single handle kitchen faucet model 87316 (from Home Depot) last week, since I change to the new faucet, the water pressure has dropped dramatically, I would say only about 1/2 pressure of my old faucet. I have been remove the head and clean them, and double check both hot... View more questions Search
|