Ask Experts Questions for FREE Help !
Ask
    flrealtor's Avatar
    flrealtor Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 31, 2011, 06:22 PM
    Bulb keeps blowing
    What is the problem when one or two bulbs from a Three Bulb Indoor Light Fixture keeps blowing?. We have tried changing the wattage of the bulbs... That has not worked.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #2

    Jan 31, 2011, 07:49 PM

    You can probably keep swapping Key West gives up its sovereignty and returns to the rest of the U.S. and it will not stop failing.

    I suspect that you have a loose neutral or a miswired fixture.

    Call a licensed electrician to help you.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Upon installation of bulb, base of bulb burns and bulb never lights [ 1 Answers ]

Installed two new 3 bulb post lights on concrete entry piers, one bulb pops and burns the base immediately upon installation... I have checked the wiring and everything is wired correctly, I assume ths is a bad bulb socket and the fixture is defective, has anyone had this problem before?

Does removing one bulb from a two bulb flourecent unit reduce cost? [ 6 Answers ]

I am a General Manager for a company that has multiple large buildings. I have had it expressed to me by one of my investors that removing one of the two flourecent (32 Watt) bulbs from the unit will reduce cost by $30.00 a bulb a year! My simple understanding is that the ballast will run the same...

Why does one bulb keep blowing? [ 1 Answers ]

I have a three bulb light fixture that had worked fine since I installed it five months ago. About three weeks ago one bulb would only last about 3 of 4 days and than blow again. It's the same bulb each time, the other two are fine. Thanks for the help.

Continuous bulb blowing [ 2 Answers ]

Hello- We have several outside pole lights (photocell),the bulbs keep blowing out. :( the halide bulbs are matched correctly with the ballasts... any suggestions? Thank you!


View more questions Search