I accidentally chgd a 'setting' on my RCA TV. Now no cable.

MerRob54 Posts: 2, Reputation: 1

New Member

Jan 29, 2011, 11:49 AM

I accidentally chgd a 'setting' on my RCA TV. Now no cable.

I accidentally chgd a setting on my RCA TV and now I can't get channel 3 to pick up my cable. I haven't unplugged any of the cables, so I know the cables are hooked correctly. Can anyone tell me how to 'reset' my default TV settings? Please respond to [email protected]. Many thanks.

Check out some similar questions!

Connecting dvd recorder to hdtv for recording and playback without changing rca cable [ 0 Answers ]

I have just purchased a Sanyo LED LCD 80cm TV (LED32XR10F) http://www.sanyo.com.au/products/tvs-set-top-boxes/led-tvs/led32xr10f I wanted to connect it to my LG DVD Recorder (RH1777) I only have an RCA cable (the Red/White/Yellow Audio/Video one) The TV manual says: To connect a VCR for...

My Car Amp only has RCA imputs and my factory Head Unit does not have RCA output? [ 5 Answers ]

I recently got a RF p4004 4chan. Amp for my car and I'm looking to hook up a sub or two. My question is how can I hook this up. I have run all my amp wires (Bat. remote, ground) but the only input I have for my amp is a pair of RCA cables. I took an old cable and cut the terminals off one end...

Jvc lt-42x579 TV won't let me change to cable setting [ 1 Answers ]

I have a 42" jvc lt-42x579 flat screen TV and somehow it set its self back to the air setting and I need to change it to the cable setting so that my picture will come in right again. When I try to go and change it it will go from the cc setting to the v-chip setting, it skips right over the...

Connecting both dvd/vcr RCA jack connecters via a cable receiver [ 1 Answers ]

How can I connect a dvd/vcr combo to a cable receiver without using the "S-Video"? I hope this can be done. (Wanting to watch a dvd) If someone has instructions, that would be awesome. Thanks :0)

View more questions Search

Check out some similar questions!

Add your answer here.