Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Proper grounding of a sub panel
[ 3 Answers ]
Where in the NEC 2008 are the instructions for the proper grounding of a sub panel within the same residential building?
Differnce between neutral grounding and separated grounding
[ 1 Answers ]
What is the difference between neutral and separate grounding?? Why and when do you defer between them?? Basically why do we ground, what's its purpose and what are the differences between the varying methods. I hope I don't sound dumb but the US NAVY nuclear electrical school didn't teach me ...
Well pump: correct breaker and proper grounding?
[ 1 Answers ]
Hi, I am installing a pump on an existing well. The motor on the pump is 230 volt/7.2 amp. The placard reads ,"switchless motor, no switch, no governor,Thermally protected KA". The following are questions I have regarding the installation: 1) What breaker would be correct, since it is...
Proper Grounding
[ 5 Answers ]
I am installing a new electric Service to my home. I am upgrading to a 200 amp service and relocating the meter box. I plan on using #3/0 wiring from the meter box to the Load Center, then using #2/0 from the ground rod to the meter box and the Load Center. I have 2 questions. First, Do I need...
Proper grounding for 400A service and adjoining panel
[ 1 Answers ]
I am installing a 400A service panel on the outside wall of a garage. For the time being it will only be supplying power to a 125A panel located on the inside wall of that garage. The 125A panel will be mounted inside the wall directly behind the 400A service, and the two will be connected by... View more questions Search
|