Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do I programme a noma programmable, 7 day timer, modelN1507?
[ 1 Answers ]
I have an exterior noma timer, model N1507, 1875 Watts. Controls are: Clock, Mode, Prog. Day, Hour, Min. I do not have the manual and have tried different approaches to set it to switch on at , say 7 p.m. and off at one a.m. All efforts have been unsuccessful.
Instructions for my Noma 7 day Thermostat have been lost.
[ 1 Answers ]
The instuctions for my Noma 7 day thermostat have been lost. It seems to have a mind of its own and will not hold the settings I have been trying to put in.
Noma programmable indoor timer. How to set it for one on off cycle every day?
[ 1 Answers ]
Good afternoon, I purchased a Noma indoor programmable digital timer. I do not understand the instructions. I simply want it to turn on and off once on a daily basis. I would like every day to be the same and to run indefinitely. When I tried to program the unit it was coming on every twelve...
Installing a noma 5+1+1 day Programmable Thermostat and I'm over heating
[ 1 Answers ]
Greetings, I am replacing the original mercury thermo in the house we purchased about 6 months ago. After installing it to the best of my knowledge (I read the little booklet) I found that the furnace (a oil powered water heater which is pumped throughout the house) is heating up the house well...
Noma digital 7 day install
[ 2 Answers ]
I have radiant in floor heat, 2 Honeywell dial type thermostats. Heat source is an oil fired hot water heater. Old therostats have 2 wires 1 black and 1 white. On the new multi terminal digitals what does the black connect to and also the white. No blower or A/C. There is a removable loop... View more questions Search
|