Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do I reassemble tub a push n lock tub drain?
[ 10 Answers ]
I took a push n lock type tub drain apart to replace the washer. There are 2 springs, several plastic parts, one large screw and the top. How do these parts fit back together?
Koehler single handle tub/shower handle leaks
[ 2 Answers ]
I have a koehler single handle tub/shower asselmbly. The faucet is in the tub, the shower head obviously above and the single handle is in the middle. You pull up on the lever to turn on the water and left to right for hot and cold. You do not have to put it back to center to turn off. Anyway....
The valve knob doesn't seem to tighten. You can turn, and turn, and turn the knob
[ 2 Answers ]
The toilet valve knob has issues. I can't turn off the water to the tank. Neither can I increase the water flow to the tank. The knob just turns without any real resistance. Should it be replaced? Also, the water level in the bowl is significantly less that what is "normal".
Shower handle leakes from the knob
[ 1 Answers ]
Hello everybody: The house is about 15 years old. This shower has been giving me problems with the hot water first and now is leaking from the middle handle that controls the shower and the tub. My main concern is that I cannot get to the assembly to change the parts because the shower is a...
Outdoor Spigot Knob / Handle
[ 1 Answers ]
I'm getting ready to replace the knob on the outdoor hose spigot of my house. Not having done much plumbing, is there anything unusual I need to know? (ie: do I have to turn the screw right instead of left to loosen, or anything odd and plumbing-specific like that?) Any tips welcome. View more questions Search
|