 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gas Furnace Blower Motor
The Blower Motor is making a grinding noise each time it starts. I know it needs some adjustment on the belt or lubrication, but I couldn't figure how to reach to it to get it out and fix it. The back and the right side of the furnace is attached to the wall only. I'm sure there is a simple way to get to it. Thanks.
|
||||
Check out some similar questions!
I have a Bryant 90 Plus (350MAV) and have a problem. I noticed that the heater was not turning on. I opened the furnace door and found the diagnostic led flashing 1-3. Upon checking the meaning of the code, I found it referenced a dirty filter of defective blower. I shut the furnace off at the...
I changed the battries in thermostat. I hear my furnace running but the fan does not come on to blow heat. Is there a reset button I need to push to fix ? If so please explain how.
I have an old Rheem gas furnace. My fan blower motor stopped working. I had Sears order me a new one. The installer walked away, giving up because he couldn't get the old motor out of the housing. I got it out and installed the new one myself. Everything turns freely. I made the furnace turn on and...
How do I adjust the blower on my gas furnace to come on after the pilot ignites, not before
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
