Ask Experts Questions for FREE Help !
Ask
    rp7639's Avatar
    rp7639 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2011, 07:58 PM
    Removal of a ge meter base type 1-60-s
    When you remove the socket from the base does it have stab connectors that just pull out
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Jan 25, 2011, 03:46 AM
    Please show a photo of the meter, it is too old to find any datasheets so we can determine how to answer.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    Jan 25, 2011, 05:06 AM
    Quote Originally Posted by rp7639 View Post
    When you remove the socket from the base does it have stab connectors that just pull out
    WHY are you even considering removing an electrical meter?

    This is usually done by the utility.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cable to use from meter base to breaker box [ 16 Answers ]

I am moving my current breaker box to the outside of my house. It will sit approimatly 1 foot from my meter base, I will need about 10 feet of cable to make the run (I think). I just need to know what kind of cable I need to use. And if I need to have it in a conduit. I have look in the NEC,...

Mounting meter base? [ 8 Answers ]

Hi, Old aluminum siding on old house, would you recommend cutting away the siding where the meter base will mount? Or just mount it on marine grade plywood over the siding? Owner hopes to be able to redo the siding in the next few years. Thanks

PVC for service to meter base [ 1 Answers ]

Installing a 200A meter base for overhead service on a shed/workshop building. Could or should I use PVC 2" through roof eve to weather head? Will PVC be strong enough to support elec. Cable from pole?

Relocating underground conduit and meter base [ 5 Answers ]

I am putting a small addition on my house and have to move the service entrance underground conduit and meter base from one wall, around an outside corner to an adjacent wall. The meter base is about 2 feet from the corner of the two walls and I am hoping to dig down to the 3" schedule 40 conduit...

Meter Base with disconnect and A/C Breakers [ 3 Answers ]

My meter base will have an outside 200amp disconnect. It will also have three 30amp breakers to feed the A/C units located a few feet from the meter. There will also be a 200amp main panel located in the basement. My question is if my disconnect outside is a 200amp and I have three 30amp...

View more questions Search