Check out some similar questions!
New hot water heater installed, but no hot water pressure. Plenty of cold water?
[ 11 Answers ]
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
No water in hot or cold bathroom sink after flushing my gas hot water heater
[ 5 Answers ]
Thank you. I flushed my hot water heater last night. I only turned the cold water intake to the heater off and on BUT now, after the flush, my second floor bathroom sink faucets (both hot and cold) don't work at all. The shower and the tub in the bathroom work but NOT the sink- HELP! Thanks so...
I have very low hot water pressure from my hot water heafrom an electric water heater
[ 0 Answers ]
I have very low water pressure from my hot water heater. I can't find anything wrong.. any ideas?
Does is matter which hot water heater I buy to get mazimize hot water pressure?
[ 8 Answers ]
Need advice in choosing new hot water heater to maximize hot water pressure. Plumber installed new intake/&out copper pipes, new coldwater cut off valve, new line to humidifer, correctly switched hot and cold lines to water heater, flushed - and still hot water pressure is low all over the house....
No hot water in shower and water heater affects both cold and hot water flow
[ 1 Answers ]
1. No hot water coming from shower even though there is hot water coming from face basin in same bathroom and throughout the house( moen plumbing) 2. when water heater valve to house is turned off the cold water and hot water from shower does not flow, yet in other faucets throughout the house... View more questions Search
Add your answer here.
|