 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Washing cycle stops; replaced with buzzing noise
During the washing cycle the unit stops and there is a loud humming noise. It sounds like the motor is trying to run. This can happen at any point in the cycle but mainly during the wash, after the water has filled. If I leave it alone with the knob pushed in (off) it will work again in about 10 minutes. I am hoping there is a way to fix this myself.
|
||||
Check out some similar questions!
This washing machine has been working but the problem is when it gets to the spin and rinse cycle it stops, as if it just soaks in there and the water doesn't drain out. Any ideas what the problem could be and can it be fixable. I don't know much about washing machines, so easy terms would be...
HELP! Whirlpool Direct Drive (~20 years old) 1. Agitates fine 2. Fills/Drains fiine 3. Spin cycle - increased noise with increase in speed, ultimately very noisy and sounds like there some sort of popping that momentarily reduces the speed of the spin 4. If I hold the agitator from spinning...
My kenmore washing machine when in the spin cycle makes an awful knocking noise and is actually not spinning but moves maybe 2 to 3 inches?. Could it just be the coupler?
I have a Kenmore clothes washer model 417.29042991 (10 years old) that makes a LOUD intermittent ratcheting sound during spin cycle. Any ideas? Thanks, Dale
Hello, I own a Maytage Neptune MAH4000 washing machine. Lately, the spin cycle has been getting more noisy until now when it sounds like an airplane ready to taxi down the runway. I opened the back of the washer to observe and noticed a lot of vibration and large sway of the tub during spin. ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
