Ask Experts Questions for FREE Help !
Ask
    sac9792's Avatar
    sac9792 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 23, 2011, 01:56 PM
    Washing machine problem
    The rinse cycle is putting trash back into the water.
    oneexception's Avatar
    oneexception Posts: 92, Reputation: 10
    Junior Member
    		  
    #2

    Feb 9, 2011, 12:20 AM
    They make a washing machine cleaner for this reason. Available at most grocery or hardware/home improvement stores. This should help break up and flush any built up lint and or residue left behind.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Kirkland Signature Washing Machine DRAINING Problem [ 1 Answers ]

Bought this AR 711625 Part No. 3953661 5-cycle Heavy Duty Extra Large Capacity 2-speed Washer 2nd hand about a month ago. About 10 days ago, started having trouble with the dirty grey water draining, but found if I hit the machine at a certain place on the top right and side, it would agitate and...

(another) Washing machine Drainage Problem. [ 4 Answers ]

The other day the washing machine drain overflowed all of a sudden. Thinking it is clogged for sure I have attempted to snake the drain with no luck. I can't seem to get the snake past the 90 degree (no trap) curve at the bottom of the standpipe. I next attempted a drain cleaning bladder which...

Washing Machine Drainage Problem [ 1 Answers ]

My KitchenAid washing machine wants to overflow out of the drainage pipe onto my floor when I do a load of laundry. I've tried putting drain declogger in the pipe. When I fill the washer with hot water to flush the declogger/clog out, the water flows out with no problem at all; however, when I do...

Washing Machine Drain Pipe Problem [ 1 Answers ]

Our home is about 6 years old with the washing machine on the second floor. Just lately, the drain pipe backs up a little water, but mostly bubbles. I've tried to snake the pipe but I can only get four feet in before I hit a bend that the snake gets stuck on. I don't think this is the blockage...

View more questions Search