 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
If you are having problems with a newly installed water heater, review the Installation section or Troubleshooting Guides. Most problems with a new water heater are installation related and most are easy to resolve. Hot Water 101 Cheers, Tom
I have a question guys, I had the set up with the aav picture, however, just received a new washing machine and the hose didn't fit into the pvc pipe. So I chopped off the top part and just dropped the washing machine hose into the pvc pipe. However, being a new machine and emptying at 17 gallons...
The new mangers just placed a new hotwater tank in the apartmet building I live in and I get really hotwater in the kitchen and in the bathroom sink why don't I get any hotwater in my shower its just warm and sometimes it goes freezing cold when I take a shower for more than 5 minunets.
Hi, My washing machine is overflowing from the wall, because, according to the plumber, the 2" PVC that is connected to the old 1 1/2" galvanized pipes doesn't leave enough room to drain when the pump starts on the machine. He thinks the galvanized pipes are probably mostly blocked. He also says I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
