Ask Experts Questions for FREE Help !
Ask
    USRCJOR1's Avatar
    USRCJOR1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 17, 2011, 05:00 PM
    GE Profile Water Cooler Cold Not dispensed
    I have a GE Profile Water Cooler. The cold dispenser doesn't dispense water. Any ideas how to fix it? After I turn off the cold switch, after a day it begins to dispense again but when I turn the cold switch on again, after a day it stops. It is almost like a tube freezes. Any suggestions?
    Handyman2007's Avatar
    Handyman2007 Posts: 988, Reputation: 73
    Senior Member
    		  
    #2

    Jan 31, 2011, 07:18 AM
    It does sound like it is freezing. If you have a manual for it, look to see it there is a thermostat that can be adjusted.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Samp cooler throwing out water inside [ 1 Answers ]

My roof top down draft swamp cooler is throwing water out the vent inside when it is turned on. What is wrong and why is it doing this?

GE Profile Water Cooler leak [ 1 Answers ]

I have a GE Profile Water Cooler. We replaced the bottle of water on Wednesday morning and noticed that the bottle was cracked and leaking down the side. We removed that bottle and put another new one on the water cooler. Everything looked fine. We were gone from Wednesday at noon until Friday...

GE water cooler is freezing up in the water tank. [ 0 Answers ]

Not sure about the fan. The back of the cooler is inclosed with a S shape coil from the top to the bottom of the cooler.Ther is a wire that is attached to the bottom of the coil. The water is freezing in the water tank. The water bottle sets on the top of the water tankupside down. I have drained...

Need help with GE water cooler [ 2 Answers ]

Water is frezzing in the cold water tank.

Water at both showers cooler than rest of house. [ 18 Answers ]

We've had to adjust our hot water heater to accommodate a new dishwasher that requires hot water to be between 120-130 degrees so we've turned it down from somewhere in the HOT range on the dial to exactly at WARM. Our main shower and our second bathtub/shower both feel barely warm but all...

View more questions Search