Ask Experts Questions for FREE Help !
Ask
    RBD1205's Avatar
    RBD1205 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 13, 2007, 09:30 PM
    Installation Problems
    I Installed A Hampton Bay Ceiling Fan. The Dimmer Switch On The Wall Worked On The Other Ceiling Feature But Can't Get It To Work Now. Any Help Will Be Greatlly Appreceiated. Ruthann
    RBD1205's Avatar
    RBD1205 Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Jan 13, 2007, 09:34 PM
    I installed a Hampton Bay ceiling fan and dimmer swith doesn't work. It did NOT come with the fam kit. PLease advises ASAP RuthAnn:mad:
    RBD1205's Avatar
    RBD1205 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jan 13, 2007, 09:39 PM
    I have installed a Hampton Bay fan unit which did not come with a dimmer swith. My old switch worked wonderfully the old fixture. I would like some quidance to see what I have connected incorrectly and would appreciate you assistance promptly. Sincerely Ms RuthAnn Deadmond.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Thermostat problems or furnace problems [ 22 Answers ]

Is it possible that a thermostat operates correct all the time except when it reaches the temperature that is set doesn't maintain that temperature?:D I noticed that actually that thermostat gives a signal to the furnace but furnace doesn't turn on but that happens only when thermostat needs to...

Laminate installation [ 3 Answers ]

Hello, My neighbor has glued a large piece of laminate to a freestanding counter. There is about a foot of excess material left on each side. What is the best method of trimming the excess material close enough to the counter so that a router can be used to finish the project? Thank you

Thermostat Installation [ 5 Answers ]

About to install a new Honeywell RTH6300B thermostat. I have 4 wires coming from the wall... green, white, red and blue. Old thermostat had connections for W, RH, B, RC, G, O, Y... (Old thermostat was White Rodgers model # 1F86-244.) New Honeywell RTH6300B thermostat has connections marked G, W,...

Installation [ 3 Answers ]

Hi, How can I install a OS if my CD ROM is not functioning.

View more questions Search