Ask Experts Questions for FREE Help !
Ask
    jcreichard's Avatar
    jcreichard Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 16, 2011, 08:45 AM
    GE DRYER
    My dryer is not heating at all. I see the flame on for a min or two then off. Does the flame usually stay on continuously? This is a GE Dryer DDG728SBLWW. I just changed a the baring yesterday because it was squeeking so bad. I wasn't having trouble with heat until I put everything back together. Thanks John

Check out some similar questions!

Kenmore Model 417.94712400 stackable washer/dryer; dryer doesn't heat up. [ 4 Answers ]

Dryer drum rotates, and it responds to the "cycles" dial, but the heating element doesn't heat up. Is there a reset button somewhere, or do I need to replace the heating element, OR? Thank you.

GE dryer drum not turning- felt ring destroyed- dryer just hums when you start it? [ 2 Answers ]

GE Model DHDSR46EG6WW Serial MR701623A

I have a frigidaire dryer model number FEQ1442ESO. The dryer runs but doesn't heat. [ 0 Answers ]

I'm guessing the thermal limiter is bad, but can't figure out how to get to it.

The outlet for my dryer made a popping noise when I turned the dryer off. Fuse? [ 3 Answers ]

I had the dryer running and turned it off. At that time, the outlet made a popping noise. The dryer doesn't run anymore. Can it be fixed?

My electric dryer vent from dryer to wall collects A LOT of water. [ 1 Answers ]

I have an electric dryer which is vented through the attic to the roof. The vent from the dryer outlet to the wall collects a *HUGE-* amount of water resulting in an excessive amount of drying time (if I'm lucky, they finally dry!). When I emptied the vent & rehooked everything up, I noted that...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.