Ask Experts Questions for FREE Help !
Ask
    huey13's Avatar
    huey13 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 15, 2011, 11:10 AM
    My york diamond 80 is not lighting
    A month ago my heater was not staying on. I cleaned the flame sensor then it started working. Now I wake up this morning and no heat. Once again I cleaned the flame sensor and started it up but I noticed I was not getting a flame ignitignt.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Jan 15, 2011, 07:26 PM
    The job of the flame sensor is to prove a flame. If you have no flame in front of the sensor, I would start by cleaning the burners and burner orifices
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Diamond 80 york ac [ 2 Answers ]

Can I tell the " tonage" of my York compressor by the model # or serial #? Model # H2RA036S06A Ser# EBGH055784 . THanks

York Diamond 80 [ 1 Answers ]

I have a York Diamond 80 and blow motor continues to run even when the thermostat is in a off position. When you turn the thermostat to the on poisition and set to temp for heat the blower will turn off and the heat will kick in and will run fine. Once the house reaches it's temp. The heat will...

York diamond 80 [ 1 Answers ]

I have a York Diamond 80 heater. The blower won't go off unless I unplug it and I get an error code of 5 flashes. I have no manuel to see what the error code means. Can anyone help?

York Diamond 80 not lighting completely [ 4 Answers ]

Hello, I have a York Diamond 80 furnace that was installed new in 2001. My problem is that the Heat exchanger will not fully light and stay on. The ignitor works fine but when ignition begins only the two burners closest to the ignitor ignites. The two will burn for a few seconds then go...

York Diamond 90 [ 1 Answers ]

I have a york diamond 90 and I have 4 code show what could it be

View more questions Search