Harbor breeze both fan and light not working

block2012 Posts: 1, Reputation: 1

New Member

Jan 15, 2011, 10:45 AM

Harbor breeze both fan and light not working

donf Posts: 5,679, Reputation: 582

Printers & Electronics Expert

Jan 15, 2011, 02:11 PM

Start by making sure that the circuit breaker is on. Sometimes it may look as though it is on. Turn the handle all the way off and then back on to reset it.

Add your answer here.

Check out some similar questions!

Ceiling Fan working, Fan light not, Harbor Breeze [ 7 Answers ]

I recently tried to help a friend install a Harbor Breeze ceiling fan w/ a light kit (this model 52" White Ceiling Fan ENERGY STAR®) The fan has 4 wires: green, white, black, and blue. The house has 3 wires: green, white, and black. Per the instructions we hooked up the green to green,...

My harbor breeze fan/light does not work the light only works by pull chain [ 3 Answers ]

The harbor breeze fan/light does not work with remote. Thae light works by pull chain but fan does not. The light on remote turns on when I press light or fan , but does not work fan or light

Harbor Breeze light kit not working [ 1 Answers ]

I just bought light kits for all four harbor breeze fans in the house. Light kits are harbor breeze brand. After following the directions with the kits and connecting the correct wires (it was easy as they were marked in the fan), the fan continues to work, but no go with the lights. I thought...

Harbor Breeze Ceiling Fan/Light remote stopped working [ 1 Answers ]

I have a 1 yr old harbor breeze ceiling fan/light that works by remote only. The remote has quick working even though the red light still illuminates when pressing the buttons. I have replaced the battery. When using the wall switch, the fan comes on but the lights do not which is likely the...

Harbor Breeze fan not working [ 2 Answers ]

We have a Harbor Breeze remote control ceiling fan. When trying to turn it on the fan nor the lights will come on. If we hold any of the buttons on the control the fan will turn on but when released the fan goes back to slow. Even if we push the light button and hold it down the fan will start...