Ask Experts Questions for FREE Help !
Ask
    kcrigger's Avatar
    kcrigger Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 15, 2011, 07:26 AM
    Is there a reset button on the aqua air water system tank model v60
    We lost power, water pressure is very low.
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #2

    Jan 15, 2011, 10:33 AM

    Two things:

    1. Make sure you still have prime. Remove the plug (maybe a gauge) on top of the impeller housing of the pump. Should be filled with water. If not, pour in water until it overflows, then replace the plug.

    2. See if your switch (little grey box with wires coming in/out) has a reset lever. Reset the switch if it does.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

A.O. Smith Aqua-Air Model V60 Water Pump and Storage tank [ 2 Answers ]

We have an A.O. Smith Aqua-Aid Model V60 Water pump and storage tank. The pressure fluctuates between 35 and 58 psi when water is running. I believe this to be normal. My issue is after a period of non-use and water is run the tank will make a "bang/clunk" sound when the pump turns on. It...

Aqua Air Water System Tank model V60 [ 4 Answers ]

Cost of Aqua-Air water system tank model V60C [ 0 Answers ]

We have an A.O. Smith Aqua-Air Model V60 water system. [ 0 Answers ]

In the mornings and sometimes when the water has not been used for a while, when you turn on the faucet it "spits" at you. Is there air getting in the line from the pressure tank? Would correcting the pressure in the tank fix this? Any suggestions?

What is the cost of an ao smith aqua-air water system tank model v60 [ 0 Answers ]

What is the cost of an ao smith aqua-air water system tank model v60

View more questions Search