 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Geothermal with 2 compressors:How to Achieve Maximim Economical Performance
Which is most Economical/Beneficial to (a) to always run both compressors in tandem or (b) use the second compressor when the outside temperature drops to O°c (for example) to assist the 1st compressor?
|
||||
|
||||
|
If it was my system I would run it with a two stage thermostat. Set it up for time and temp diff. to bring on second stage. If the system runs longer than 15 min second stage will kick in or if you have more than a 2 degree swing in temp second stage will kick in. It cuts down run time of the system in turn will save you money.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
We have a new house with air to air heat pump and electric furnace. We are having trouble getting the house up to temperature at the time selected on the thermostat. The furnace supplier is telling us not to lower the temp during the night and bring it back up in the morning, but it is better and...
I am upgrading my home to a 200 amp service and thought it would be a great idea to install a switch or breaker between my meter and my breaker panel. I have looked around and found these switches very expensive. Most are in the range of $250 to $400. I just want a way to remove all power from...
A cylindrical container costs $3.00 per square foot for the sides and $4.00 a square foot for the top and bottom. The container must hold 100 cubic feet of material. What are the dimensions of the most economical container.
View more questions Search
|
