Upgrade thermostat from Weathertron to White Rogers

Check out some similar questions!

White rogers thermostat issue [ 4 Answers ]

I have a White rogers thermostat model 1F58W-77 and the wires I have that are hooked up right now are: RED-R GREEN-G YELLOW-Y WHITE-W1 BLACK-X1 ORANGE-O What I am trying to do is replace it with a honeywell T8400c. The manual says only 5 wire but this one I guess is the old one that has...

White rogers thermostat 2 stage heat 1 stage cool [ 6 Answers ]

Anyonw know how to hook this up with a dpdt relay There is 5 wires , outdoor heat for stage 1 heat , propane gas for stage 2 hear Thanks For any help :confused:

White rogers thermostat 2 stage heat 1 stage cool [ 1 Answers ]

What is the right wiring to hook the WHITE ROGERS 80 SERIES thermostat up ( 1F82-261)? I have a outdoor wood burner dlowing hear to a exchanger in the ducts , and I have propand gas as a back up sorce The furnace is a coleman evecon ( 94 model) with ac (up draft) I think I had the wiring...

Rplacing Weathertron thermostat with White Rodgers [ 3 Answers ]

Hello, I have a heat pump with auxiliary electric heat controlled by a Trane Weathertron thermostat. I am attempting to upgrade the thermostat with a programmable White -Rodgers(1F85-277)heat pump thermostat.I want to verify the correct wiring hookup for White-Rodgers Thermostat to the current...

2 Wire White-Rogers with no wallplate wire question [ 2 Answers ]

Hi there. I want to replace my current White-Rogers 1E56W309 thermostat with a new Honeywell RTH7500D. The problem is that the tools that installed my high efficiency furnace didn't install the wall plate with my thermostat (it was a new house and the builder contracted these guys). Instead,...

View more questions Search

Check out some similar questions!

Add your answer here.