Ask Experts Questions for FREE Help !
Ask
    kwaichen's Avatar
    kwaichen Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 12, 2011, 01:39 AM
    2004 f250 psd auto locking hub problem
    The auto locking hubs on my 04' F250 PSD recently began disengaging randomly while 4HI or 4LO is selected. When to hubs are locked manually the 4 wheel drive works as it
    should.
    The AC Fan has also been switching randomly from Max to Defrost only when the 4 wheel is engaged.
    Has anyone else had these problems and/or identifited fixes?

Check out some similar questions!

2004 F250 6.0litre diesel [ 1 Answers ]

My 2004 f250 6.0 diesel makes a humming noise when you turn the ignition key on, and also when you turn the truck off. What might cause this?

2004 f250 diesel [ 1 Answers ]

I have f 250 diesle and it does not want to start when the engine is cold. It will finally start after you spray either in the air system but it seems to be starving for fuel or air. After it starts and gets warmed up it runs good. I think that it might be the turbo. What do you think?

2004 F250 diesel won't start. [ 2 Answers ]

2004 F250 Diesel powerstroke 6L - While driving, gas pedal went to the floor, but no power. Shortly after, it shut off. With no power steering, I got it to the side of the road. Changed fuel filters. It cranks, but just won't quite turn over. What now?

Help with 2004 deisel f250 [ 1 Answers ]

I have an 04 powerstroke 6.0 that I absolutely love. I have added the edge box, methanol posi rear. I bought this truck used from a dealership with less than 30.000 miles. I plow commercially in the winter and truck pull in the summer. It just blew up, thougt it was the head gasket, was using...

Ford f250 6.0 psd keeps blowing the engine control fuse [ 1 Answers ]

Ford f250 6.0 psd keeps blowing the engine control fuse


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.