 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Need help to fix wiring inside space heater switch.
I have a Honeywell/Kaz Hz-690 oil filled heater. There is a wire inside that is broken. I would like to replace the wire (and do them all while I'm at it) but I'm unsure as to how to do this. There is a square object inside the unit that the outside switch attaches to. Four wires exit this object. There are 2 small metal clasps on the object that I may be able to pry off and that *might* allow me to open the object so that I could solder in new wires. I'm afraid if I pry the object open I will break it. My questions: 1) What is this object (I have a picture but don%u2019t know how to attach it to this post %u2013 I could email it)? 2) How can I open it to solder in new wires? Thank you.
|
||||
Check out some similar questions!
My monitor heater is 3 years old and has never had a problem since installed. It is now giving an E 13 error code. Where should I start when trouble shooting? I have 2 other monitors that come off the same fuel supply line, this is the first in the series. Any idea where to start?
My cat dropped (yes I am going to blame him) a glass candle holder into the toilet which left a small nickel size hole inside the toilet bowl. It's more near the front of the bowl right at the water line. Now the strange thing is when I flush water comes out of the hole? I thought the inside of...
I have a 220 warehouse type heater already hooked up in my garage, I going to move it and I want to hook a wall on/off switch to operate it behind my bar (oh you my garage is a full bar :) ) is this possible and can you tell me how the wire configuration would be, box to switch,switch to unit?...
I want to run wire from my breaker box to my storage shed, For a space heater # Input: 240/208 V # 16.7 / 14.4 Amps # Watts: 4000 / 3000 # BTU: 13650 / 10238 # Plug Type: 20 Amp Which type wire do I need, 10/3 or 10/2?, can I use 12 awg ?
I want to replace my water heater switch with a timer. I need to identify which live wire comes from the mains and which leads to the heater. I unscrewed the switch from the wall to test both wires with a test-pen. With the switch at ON position - the pen lit up each time as expected. Then with...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
