 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant 395CAV036055 Won't Light
My furnace has set for a couple years. When I run the self test everything works that's suppose to during the self test. I also have replace the thermostat. When I turn the thermostat on and the gas on the exhaust fan comes on but the glow plug doesn't come on. Thus not lighting.
|
||||
Check out some similar questions!
I have read the instructions and see where to turn the gas on and hold the starter button in but I can't find where to light the pilot light. Can anyone help? I'm going to add a photo.
We have a 13 year old bryant high eff furnace and the piolt light went out it says it has an auto start ---how do we go about making it light?
I have a Bryant gas furnace that won't light. It starts its normal cycle with the inducer turning on, then the gas but the gas never ignites. It will do this three times then stops.
I am trying to help my elderly neighbor she has an older Bryant SM-E 50-394U. It had a wire that tied into the thermocouple that I noticed was melted when I went to light the Pilot light for her (my first time for her). She said before I replaced the wire she did have fans and AC, but no heat. I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
