 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Electric Furnace Damper
I have a Goodman Electric 2 Stage Heat Pump System. There is a damper lever at the top of the furnace duct work above the heating unit and wiring but before the air flow ducts. Currently this damper is set to "Half Open", should it be set, or can I set it to "Fully Open"?
|
||||
Check out some similar questions!
I have a Ruud forced air electric furnace. My furnace will not shut off.
[ 1 Answers ]
The fan and heat run continuously. I even disconnected the thermostat wires and it still won't shut off until I throw the breaker.
Check for bad furnace damper motor
[ 2 Answers ]
Damper on oil-furnace broken-keep open or closed?
[ 1 Answers ]
I recently had a brand new Bryant oil-furnace installed in September. I was downstairs doing laundry when I looked up and just glanced at the Damper. I noticed that it was off of it's hinge on the left side. Upon looking further, I noticed that there was no hinge at all! The part to allow the...
What is wrong with my wood furnace damper?
[ 5 Answers ]
When I got to reload wood I open the damper and smoke comes out the fire box door.
Furnace not heating the house. Damper on the furnace not opening. Motor then shuts.
[ 4 Answers ]
My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
