Ask Experts Questions for FREE Help !
Ask
    ladykay58's Avatar
    ladykay58 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 10, 2011, 10:24 PM
    Gas stove problem
    Were does the nipple go on the gas stove connetion
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Jan 11, 2011, 10:46 AM
    In normal stove installations, there is a 1/2" IP/flare fitting that screws into the gas valve. The gas supply pipe, copper or flex then screws onto the flare end.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas stove problem [ 0 Answers ]

My stove gas stove,electric piolit trips the breaker .repairman said it was 'energizi [ 1 Answers ]

GAS STOVE WITH ELECTRIC PILOT TRIPS BREAKER .THE REPAIRMAN SAID IT WAS 'ENERGIZED'? Landlord is replacing stove with gas pilot .will it still be energized/IS THAT DANGEROUS?

Can I convert a pellet stove to a propane gas stove? [ 2 Answers ]

Can I convert a pellet stove to a propane gas stove?

Can the ordinary gas stove be connected to piped gas connection? [ 1 Answers ]

I wantedto know whether the gas stove can be connected to piped gas connection? Please answer to me. Thanks.Aparna

Problem with GE Freestanding Gas Stove [ 1 Answers ]

I am having problems with my oven. When it is in bake mode it turns on and heats up for a minute than it shuts off. The burner appears to be slightly still on but it will not heat up to temperature. The broiler works and will burn to temperature. Any ideas?


View more questions Search