 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to connect generator to run blower motor on Trane XE 80?
I have a manual transfer switch with provides a method of transferring 6 - 120 volt circuits to a generator. If I add the circuit that feeds the blower motor on my Trane XE80 to this unit, will that allow me to run the furnace when the power is off? This unit is used as the blower and gas piggy back for my heat pump, so will I need to provide power to the thermostat via another circuit or just put it in the emergency heat mode and let the blower run on the generator by connecting the blower circuit. Please advise... Thanks!
|
||||
Check out some similar questions!
I believe I have troubleshot this down to either the blower motor or their Integrated Controller board. 120VAC to motor OK but too many other wires from board to motor for motor control to test (variable speed) without advice or a manual. Motor is rated for 100% duty cycle and has only been run...
What universal blower motor is compartible with the trane mot6359
I have a 2 year old Goodman, gas, no heat pump. There is a flashing LED that blinks once ever 4 seconds. Also, blower motor does not stay on always. We did smell something like an electrical burn. I'm guess my blower motor is fried?
Trane XV80 Installed 2002 My blower does not come on; I turned t-stat to fan only; fan motor felt cold to touch and turns freely when spyn: defeateded the safety switch on front; checked voltage at the leads from the circuit board to fan motor for the white and black leads(124 v); Should I...
Noticed last night that my Trane furnace was squeaking like a cricket when the air conditioner was running. Then every so often it would make an awful squealing sound like maybe a motor was getting stuck and unable to turn. From reading other posts I'm guessing that I might have a bearing or belt...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
