Ask Experts Questions for FREE Help !
Ask
    cristylynn's Avatar
    cristylynn Posts: 0, Reputation: 1
    New Member
    		  
    #1

    Jan 8, 2011, 12:34 PM
    Furnace not heating to right temputure
    A while back we had problems with our furnace not heating to the right temputure. Had it serviced several times, because they couldn't figure out the problem. Then they figured out that water was getting in the motor so my husband disconnected the tube that runs down the unit to the motor. This morning I woke up and it felt cold so I checked the thermostat and it was 72. We have it set on 74. I turned it off and then back on and it was fine for a few hours and now it's back at 72. Furnace keeps coming on and off so I don't know what the problem could be, any ideas?
    Thistles's Avatar
    Thistles Posts: 10, Reputation: -1
    New Member
    		  
    #2

    Jan 8, 2011, 01:10 PM
    Is your thermostat working correctly? Programed incorrectly?


    Obama has allocated funds with the heating assisting programs for people who have a problem servicing their furnaces.Or need a replacements.
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #3

    Jan 8, 2011, 01:19 PM
    Quote Originally Posted by Thistles View Post


    Obama has allocated funds with the heating assisting programs for people who have a problem servicing their furnaces.Or need a replacements.
    Thistles, can you give more info on this? Thank you
    Thistles's Avatar
    Thistles Posts: 10, Reputation: -1
    New Member
    		  
    #4

    Jan 8, 2011, 01:44 PM
    It is a grant that President Obama has given the State of CT CACD= Community Action ( Not sure nationwide) But for those who quailify for heat assistance there is a weatherrization department to help homeowners keep their homes energy efficiient.

    Call your local Social Services Deptment.If you have not applied this year for heat assistance. There is next year.

    {Comments merged, Comments feature should NOT be used for followups}
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electric iceco furnace heating element not getting power, possible solutions [ 0 Answers ]

I have an iceco furnace which in the heating mode only one of the two elements is coming on. The one element is not reading any voltage or current. Possible solution needed

How do I get furnace heating fan to stay on to heat the house [ 3 Answers ]

When I turn on the heater the gas comes on in the furnace the fan in the furnace powers up and than shuts off then the gas in the furnace shuts off I reached in the furnace and turned the fan by hand and sometimes it will go through the cycle and the heat comes on and the fan will run for 30 min....

Why does water drip from the vents above when the gas furnace is in the heating mode [ 1 Answers ]

My mom has a gas furnace in her condo. Directions on hot water heater says handles down for heat. When I put the handles down water drips from the large vents or ducts (not sure what they are called) above. No water drips if the handles are up for air conditioning mode though . Why does this...

View more questions Search