 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Light and Fan controls themselves
I have a Hamilton Bay Light and Fan. They are both controlled by a remote control. Both the light and fan started doing things on their own (Lights and fan comes on and goes off by themselves). At 1st, I thought it was the remote control sending out signals on it's own. So I removed the battery, but that did not stop the problem. What could it be. Thanks for your help. [email protected] "
|
||||
Check out some similar questions!
How do I wire 2 separate dual slide controls for 2 separate ceiling fans with lights from one power source in a 2 gang box? One dual controller is to independently control the fan from the light in ceiling fan 1 and the other dual controller is to do the same for ceiling fan 2. Can this be done...
Hello, I have a light switch in my room that currently controls 1 outlet. I would like to have power ran from that outlet up the wall (about 4 feet) so that I can install a wall mounted light and have the light switch control just the new wall light and not the outlet. I have been looking for...
After one light bulb blew out I replaced it. Since then the remote will note operate the lights, only the fan. Any ideas howto fix?
I moved into a house with phantom light switches. I took the switch plate off and the switch is connected to two black wires that pass through it - which is good - but for the life of me I cannot find the outlet or light that the switch controls. Any ideas?
I have a light switch that controls both the foyer and the front porch. I would like to separate this so that I have a separate switch for the front porch and the foyer as sometimes I would like to have the front porch light on without the beaming bright light in the foyer. The light switch has an...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
