Ask Experts Questions for FREE Help !
Ask
    jillyfeds's Avatar
    jillyfeds Posts: 0, Reputation: 1
    New Member
    		  
    #1

    Jan 7, 2011, 07:33 PM
    Decorative bathtub doors
    I had bypass doors installed in my bathtub today but I think the installer installed them backwards. They have a pattern I think they call them raindrops. But he installed the raindrops on the inside and the clear coated side on the outside. Which side are they suppose to ? Any advice would be helpful.
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Jan 8, 2011, 10:59 AM

    The smooth side of glass should be to inside of tub.
    To accomplish this, reverse to rollers on top of door.

    The design is for the outside to add beauty to room.

    Chuck
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #3

    Jan 9, 2011, 07:53 AM

    Hi Jillyfeds...

    Chuck nailed it. Call the guy back and have him reverse the doors. Smooth side in for easy cleaning and patterned side out for aesthetics... just as you thought!

    Good observing!

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Decorative Rope Lighting [ 2 Answers ]

Can someone tell me if there is a Female-to-Male connector made for HB Decorative Rope lighting? I need to connect (3) pieces of HB Rope lighting together but I have windows between each rope light set. The HB rope lights have a F-M connector on opposite ends and can be connected when directly...

Installing bypass shower doors and the shwer walls aren't plumb so doors have gaps [ 2 Answers ]

Cannot adjust shower doors to align correctly because shower walls aren't plumb... the shower bypass doors/rails etc are level and plumb but they leave gaps because the wall of the shower isn't plumb... any way to correct that enough to align the doors? Out of plumb appx 1/8 " on both sides. ...

Installing bypass shower doors and the shwer walls aren't plumb so doors have gaps [ 0 Answers ]

Cannot adjust shower doors to align correctly because shower walls aren't plumb... the shower bypass doors are level and plumb but they leave gaps because the wall of the shower isn't plumb... any way to correct that enough to align the doors? Out of plumb appx 1/8 " on both sides.

Replacing bedroom hollow doors with 6 panel pine doors. [ 4 Answers ]

I am replacing my bedroom hollow doors with 6 panel pine doors. My problem is that the 6 panel pine doors are not fitting properly. When I hung one door with the same size hinges I was able to put the screws in the same holes as the old ones but the door will not close. The new door is about...

Decorative molding [ 1 Answers ]

I bought some chair rail moldings the other day I really like, but after looking closely at it, one edge is rounded. :confused: I searched to find installed pix, but no luck. I haven't put it up yet, and I'll be placing this up against a flat 4.5" backer board for a dining room chair rail project....

View more questions Search