 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore 665 1603/ 1703 series not starting
Hi-
When the start button is pressed, the normal wash light comes on, but nothing happens. It blinks when start is held down. I turned off the power at the breaker, but all that happens is the drain cycle starts. Pressing the Heated Dry and Normal Wash buttons alternately did not reset the unit, nor did pressing the Hi Temp and Heated Dry. Contacting SEARS for any suggestions was met by a service call which I am trying to avoid. From what I've read, it seems like the problem is the control panel or control board. Anyone know how to tell? |
||||
Check out some similar questions!
Last time my dishwasher leaked, a repairman cleaned cat hair out of the active vent in the top left-hand corner of the front door. How do I get inside the vent to try cleaning it again? BTW, the vent still seems to work - shut during wash cycles and open during dry cycle.
I just finished fastening the DW to the underside of the counter. It has been unfastened for several months and has worked just fine. After completing fastening it to the counter, nothing happens when I attempt to start it. The circuit breaker is on. Is there a simple way to determine if power...
I have a Kenmore Dishwasher ultra wash model # 665.1703 . The green cleaning light is flashing and it will not start any cycle the trouble shooting guide says that when this happens it has malfunctioned what do I do?
I just installed a Kenmore 665.1603 dishwasher and when I try to run an empty test wash cycle it fills then the washing light comes on. It continues and stops. The sensing light comes on along with the washing light and then it starts washing again. This happens on any cycle that I have tried. ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
