Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Spa
[ 1 Answers ]
Isn't UF for outdoors and THHN indoors? Also when you go to HomeDepot or Lowe's There big Hanging chart says "Outdoors use UF and with a 50 amp breaker use #8" ? Ok, Last question I hope. For my spa, Can I use THHN grade wire #6 copper(romex?)for outdoors if it is running through conduit ?...
Spa electrical hook up
[ 3 Answers ]
I just bought a used jacuzzi. The manufacturer's manual calls for a 110 20amp hook up. I've had several electricians tell me different ways of hooking this up. Some will just install a 20 amp breaker and then run a wire from the panel to a GFI receptacle and plug or hardwire it in. Another...
#12 ground wire for a spa?
[ 1 Answers ]
I purchased a used spa from a friend. I am ready to run my electrical connections but I noticed the pig-tail that is on the spa has three 6 or 8 Gage wires for hot and common but the wire that I assume is the ground is only 12 Gage or so. Is this because the ground wire serves only to trip the...
Spa wiring questions
[ 4 Answers ]
I recently purchased a hot tub (spa). It calls for 6-3 with ground 240 volt 50 amp gfci breaker installed. I have almost completed the job and have some questions. I installed a 50 amp breaker in a subpanel in my laundry room and ran the 6-3 wire with ground down in the crawl space out to the...
Extending spa feed
[ 2 Answers ]
I have existing 220v wiring (outdoors) for a spa that I want to extend another 15 ft. in order to hide the panel from view. Do I have to re-wire the run, or can I just extend it with a junction box and another 15 ft. of cable/wire? I'm in California, if that makes a difference. Thanks in advance... View more questions Search
|