Ask Experts Questions for FREE Help !
Ask
    stupidquestions's Avatar
    stupidquestions Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 5, 2011, 09:53 PM
    Snow blower
    Chain falls off sprocket on 47" jd snow blower after I replaced the set screws on the sprocket. The sprocket seems to be not aligned with the drive sprocket. Could this be the problem?

Check out some similar questions!

My signature brand snow blower clogges and won't throw snow why [ 2 Answers ]

It starts up first pull sounds great one push in the snow cutes clogged and it don't throw snow

Snow blower won't throw snow impeller works auger works new belt pushes up the chute [ 11 Answers ]

The impeller works the auger works put a new belt on the snow starts to come out the chute goes about six inches plugs no broken pin checked all I could

Snow blower [ 4 Answers ]

I have an older snow blower a Yardman it is about 15 years old what is the best Oil to use in it, and what spark plug would be best. Thank you

Snow blower not picking up snow [ 2 Answers ]

I have a Noma 5.0 HP snow blower that is not working correctly. The shears are not turning and picking up the snow. I've checked the shear pins, but they seem to be in good condition. What else should I check? Thanks

Snow Blower [ 2 Answers ]

Show me the snow blowers you sell

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.