Ask Experts Questions for FREE Help !
Ask
    justaxe's Avatar
    justaxe Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 5, 2011, 09:42 PM
    obsolete miller defrost board
    Hoping someone can help, but it's a longshot. Trying to find a wiring schematic for a miller heat pump. Don't know the model#, but I believe it's a 1985. Only thing I have to go by is the defrost board thermostat connection which is w2,2,k,z,x,w1,y,r,t. Every connection is wired except w2.

    Thanks for any help

Check out some similar questions!

Voltage at Defrost Board [ 0 Answers ]

Hello, my A/C and Heat are working correctly after I replaced a faulty defrost board. However I noticed that when I test voltage on all the wires coming from the air handler (yellow, red, green, etc.. ) at the defrost board, I'm only reading ~5.3V. The defrost board says "24V AC". I can test...

Miller gas furnace mother board [ 2 Answers ]

How you know that mother board is bad

Replace a defrost board in old Goodman unit [ 1 Answers ]

How do I replace a defrost board in a 16 year old air conditioner and do I have to buy a defrost board made by Goodman?

Faulty defrost controller board? [ 3 Answers ]

I have as split-unit heat pump. When I got home the other day, it was 90 degrees! The air coming out of the vents was warm. However, neither the outside fan nor the compressor were running. A technician told me that the controller board was faulty but he would not be able to replace the board until...

Defrost control board [ 1 Answers ]

Last winter the heat wasn’t keeping up with the set temp, the outside fan came on, but the compressor would not start, you could hear it trying to start but it wouldn’t come on. The tech said the compressor was short cycling, and it was now "locked up", they put in a new compressor (part was cov’d...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.