Gas furnace ignites and reignites will I be OK till morning?

Check out some similar questions!

Atwood furnace 8520 ignites and goes out, was told not enough gas pressure? [ 8 Answers ]

I have a atwood gas furnace model 8520 IV in my rv I was told it did not have enough gas pressure, do you know how or where to adjust on valve?

Gas furnace ignites, then goes out within 15 seconds [ 2 Answers ]

Last winter I had a hot plate igniter replaced. Near the end of spring the igniter would ignite the furnace and after 10 to 15 seconds, the flame would go out. About a minute later the hot plate igniter would glow, the gas will ignite for another few seconds and go out. After several cycles the...

My gas furnace ignites and then goes out [ 2 Answers ]

Hi Guys, I have a gas fired luxaire furnace that's about 5 years old and when it calls for heat the element lights, the burners lite and then they go out in about 3 seconds the led flashes 7 times. Any sugestions?

Furnace ignites but blower won't start till furnace shuts down. [ 7 Answers ]

(Nordyne/Miller G3RA)-I have a furnace HSI(glow plug) that will ignite and burn until it gets too hot and shuts down. As soon as the furnace shuts down the blower starts to circulate air. The blower circulating air cools the furnace and it reignites.Shortly after the furnace ignites the blower...

Gas furnace ignites intermittently-ignites after removing cover from ignitor chamber [ 3 Answers ]

Unit: Carrier WeatherMaker 9200 gas furnace, with an HSI ignitor Symptom 1: Thermostat is calling for heat, as evidenced by a flame icon on thermostat face, but no action in the furnace. Symptom 2: Ignites only AFTER I initiate Action 2 below. Then it seems to work for a while, until the...

View more questions Search

Check out some similar questions!

Add your answer here.