 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a walstar oil boiler which keeps stoping but fires up on rest switch
I have changed all the fittings from oil tank to flexible hose at the boiler I did this because I had air bubbles coming in on the pipe line this cured that problem but has left me with another one. The second problem is the boiler has to be reset from the outside switch which is in the housing where the flue is. There are some weird things happening as well such as the HW/CH pump is countiuosley running if I leave the HW off the boiler fails to trip out and will run as per requested on timer.Looked at webs site sujest cold stat or oil pump may be at fault how do I prove this.any sugestions please
|
||||
Check out some similar questions!
I will install a hydronic radiant floor heat system in own house- oil tanks are now being used for hot air furnace. Would it be better to switch to propane?
I have a murray rider, briggs straton, it has a built in low oil sensor (I believe)and I was mowing when it sputtered and quit. I checked the oil and it was barely registering, so I added oil let mower cool down and tried to restart it. Everything sounds just fine, like its going to start but just...
How do I turn on a oil boiler to heat my house?
Which oil boiler is rated the best
My oil burning boiler developed a drip. I recently had my boiler inspected for rust on the exterior. A sticker on the unit housing was charred and the burning area seemed rusty. I had gone a year saving money by allowing the unit to run only when I needed a shower or wash something in warm. I saved...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
