 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Older model electric furnace problems.
My furnace was blowing cold air. The elements are not turning on. I shut the breaker off at the panel then turned it back on. The furnace heat starting working again. The furnace was running all night blowing cold air. What do you think the trouble might be? I would like to have the furnace working properly.
|
||||
Check out some similar questions!
I have a Coleman Presidential II 2702B Ida 7441-BM Electric Furnace. I have two problems. It started with the heater coming on and at times staying on even after I turned the thermostat completely down which results in killing the power. Now I have a newer problem where a heating element...
Where can I find parts for a Wesco furnace Model 15 UEM
I am trying to help a friend with a heating problem. He has a Coleman Model 3500A816 electric furnace with a heat pump which are controlled by a Honeywell Chronotherm T8611G1103 thermostat. It appears that the heating elements are not being turned on because the air from the registers is not very...
Would like to know the wiring diagram for electric furnace... model e2eb-012hb
The wiring Diagarm on the front panel is not clear enough to read. Also I need to know the proper sequencers & limits to use in this furnace. The furnace has been worked on by several people and I would like to rewire With all new parts
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
