 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I just replaced my taco 007-f5 circulator and I still have no heat.
I have a peerless boiler that new with the house (6 yrs old.) We have central air. The thermostat kicks the air handler on but it blows cool air. I replaced the 1st floor zone circulator and still no hot air?
|
||||
Check out some similar questions!
I have a High Velocity forced hair heating system that exchanges the air with hot water from my hot water heater. The hot water is pumped through a coil in the HVAC unit by a TACO 006 B4 cartridge circulator and loops back down a return to the hot water heater. There is still air coming out of...
We recently replaced an old thermostat with a programmable thermostat, and now the heat won't kick on. My husband said he switched the wires directly over, and the AC works fine. But when we switch to heat we can hear the unit turn on, but the fan doesn't turn on or blow out anything. This is a...
I had a friend replace my old thermostat with a new LUXPRO PDS 100 this summer and I had problems with my Frigidaire central air / heating system to work. At first it would not blow cool air and he came back and switched wire around. It work on cool fine for the last month and a half, but I now...
Hello - I have an Amana a/c with gas heat Took out my old Honeywell T8195 thermostat to replace with the Lux TX1500 Wired it up as follows (Lux - color - Honeywell) RH - Red - R RC - connected to RH terminal G - Green - G Y - Yellow - Y
Good morning and Happy Columbus Day everyone. I must say that anyone's help and feedback will be much appreciated. Last night the Thermostat (Honeywell Programmable CT8602) gave the low battery light as my wife was looking to drop it a degree before bed so she decided to replace the batteries. ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
