Ask Experts Questions for FREE Help !
Ask
    fernandoq's Avatar
    fernandoq Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 2, 2011, 04:39 AM
    Goodmans furnace 95 % efficient
    This unit is in my attic, the heat works but the problem is that is not hot enough, the blower start too soon and won't let the heat exchanger get hot. Somebody help me here, thank you. I change the speed in the blower to medium low still the same.
    tickle's Avatar
    tickle Posts: 23,796, Reputation: 2674
    Expert
    		  
    #2

    Jan 2, 2011, 04:53 AM

    Why is it in your attic? Hot air rises so it defeats the purpose unless you have a good forced air system. Is something wrong with the forced air system ?
    fernandoq's Avatar
    fernandoq Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 2, 2011, 05:26 AM
    My house have two furnace one in the basement and the other one in the attic that handle the second floor.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

80% vs. 95% efficient furnace in attic [ 2 Answers ]

Got two different quotes to replace HVAC system for the upper level of my house. One installer recommended a 4 ton Amana AC unit and a 95% efficient Amana furnace. The second installer recommended a 3.5 ton Trane AC unit with an 80% efficient Trane furnace. The second installer said that they...

Goodmans furnace diagram [ 3 Answers ]

I turn the furnace on the induce fan comes on but no igniter the baord flash one time evry 10 second what that mean

Carrier 1990 90% efficient furnace [ 2 Answers ]

I have a carrier furnace it starts up fine the little fan starts up the piot comes on then it goes click click and theburners ignite then the problem starts OK after the burners are lit they stay lits for 30 seconds or so and go right back out leaving the pilot lit then click click and it will...

Goodmans furnace flames keep going out [ 1 Answers ]

When I start my furnace the burners stay on for 5 to 10 seconds then go out.I check the flame sensor its OK ?

View more questions Search