 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant 90 plus furnace problems code 14
I have a 5 year Bryant 90 furnace. I believe I have a Led code 14 - one short flash and 4 longer flashes. Replaced thermostat and cleaned filter. If I set to 70 furnace blower starts heat comes on for 5-10 minutes then shuts off... any thoughts?
|
||||
Check out some similar questions!
First there was a code 24, Ireplaced the fuse, fan works, but not lighting of the flames to produce heat. Any sugestions as to the next step>
Fan starts up but no heat. Code 33 comes up.. pressure switch problem. Is it the switch or is the sensor line clogged?
I have Bryant 331AAV furance. No heat code 12? What are the possible reasons
I have a Bryant Furnace and I am getting Code 24. 3AMP Fuse is blown. The 120V to 24/40V transformer inside the unit is humming. With a meter I'm getting 20V off a lead, and 28V off another lead. If I disconnect the lead wire from the control board the fuse does not blow. Could this be a bad...
Hi everyone, I have a 9 year old Bryant Plus 90, model #CD5AXW024017AAAA that keeps giving a code 33. After doing some investigating, I found that an old filter was still against the blower motor along with the current filter. The old filter was completely clogged- I think it worked its way...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
