 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I recently installed a new thermostat (manual can be seen here), replacing an old 4 wire analog style. When heating and reaching the desired temp the thermostat shuts off. However, a few seconds later it turns back on for a very brief period then shuts off again. I guess this isn't the biggest...
I noticed a burning smell coming out of the air ducts. We turned the heat off. When we tried to turn the heat back on the heat ignited in the furnace but the blower never turned on after about 1-2 minutes the heat turned off. We noticed the burning smell again. If I turn the blower to on, on the...
My Trane BLU model blower cycles on and off about every 5 seconds when theromstat activates furnace to turn on heat up to the set temperature. While the burners are activated the blower turns on for about 5-10 seconds and then turns off for about 5 seconds then turns on for 5-10 seconds and so on,...
Here's my issue. I cannot turn on either my AC, Furnace, or Blower from the thermostat. However, I can turn on the blower by manually pressing a 'Manual On' button inside the furnace. - AC is powered and was working a couple days ago. - Furnace was also working a couple days ago. - Found...
I have a simple 4 wire, 1 stage cooling, 1 stage gas heat system. Over the winter I replaced my Honeywell CT3200 programmable thermostat with a Totaline Wireless Thermostat System. The receiver is model P474-1100REC. The sender is model P474-1100RF. The thermostat worked great through the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
