Check out some similar questions!
Magic chef furnace wiring schematic
[ 27 Answers ]
I have an old Magic Chef gas furnace in my garage. Gas is connected, but wiring for fan and thermostat are a question. 55K BTU, 12 amp blower. Need to know what wires to connect to thermostat. Also, there are three wires exiting furnace. I know which ones power the 110v blower, but there is a...
I have an 26 yr old Magic Chef attic furnace and I'm trying to find out size.
[ 1 Answers ]
What is the size of my old Magic Chef Forced Air furnace Model # EC8A75DC30-10 and can you provide me where I can get data info of this equipment.
Magic chef furnace models
[ 0 Answers ]
I have a Magic Chef LP gas furnace (Model EG6E100DC-1). Last week the heat wasn't kicking on in the morning and found that the draft inducer blower had cooked a bearing. I shut down power to the unit, removed the blower, sourced a new blower, installed exactly as I had removed it. The draft inducer...
Magic Chef Ulta 97 Furnace
[ 1 Answers ]
I have an Ultra 97 gas fired heater made by Magic Chef. I assume its about 15-18 years old. When the heater kicks on, the only thing that happens is that the blower starts running but the ignitor does not ignite. There are 2 flat cylinder type switches when you open up the door. If you tap on... View more questions Search
Add your answer here.
|