Central Heat 2 cycle

nlynn Posts: 1, Reputation: 1

New Member

Dec 27, 2010, 10:16 PM

Central Heat 2 cycle

The thermostat is set on 69 and the unit is warming the house, but it runs through 2 cycles before shutting off. It sounds like it shutting off, then it runs through another cycle of heating. Do you have any idea what may be causing the unit to 2 cycle?

Check out some similar questions!

My central gas heat kicks on but does not light or heat up what is the problem? [ 1 Answers ]

Central gas heat kicks on briefly but their is no flame

Electri Central heat noy putting out any real heat [ 1 Answers ]

My son's condo has central heat and air, but when the heat setting is put on, there is very little heat being produced. The air coming from the registers is barely warm. Trying to get an idea of what the problem might be. He has installed a new thermostat, but that didn't help at all. Thanks

Central A/C does not come on after cycle [ 2 Answers ]

The outside fan does not come back on after the cycle. I have replaced the fan capacitor and the unit appeared to work fine. But during the day it quit working. The next morning it started right up and worked for several hours but now again it has stopped. It is a Janatrol? Not sure about...

Hunter 44155C Wiring - A/C turns on during heat cycle or heat will not shut off [ 0 Answers ]

Trying this again with the correct thermostat specs. Sorry, guys! It's a Hunter 44155C and the wires I have going into it are: White - W/B Red - Rh Green - G Yellow - Y1 Jumper from Rh-Rc

Central ac fan cycle [ 1 Answers ]

I recently installed a new honeywell thermostat because the old one wasn't measuring the temp correctly or consistently. The new thermostat is doing a wonderful job of maintaining a consistent indoor temp but whenever the cooling cycle begins the ac unit starts up then there is a few second delay...

View more questions Search

Check out some similar questions!

Add your answer here.