Ask Experts Questions for FREE Help !
Ask
    michaelyates's Avatar
    michaelyates Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 27, 2010, 06:31 PM
    Put in new thermostat heat and ac both coming on

Check out some similar questions!

No heat coming out of heat and air unit [ 0 Answers ]

Heat and air unit is blowing cold air and the air doesn't heat until you jack up the thermostat and I guess the auxiliary heat is kicking in

Why won't my thermostat my central heating go higher and put out more heat? [ 1 Answers ]

My thermostat on my central heating unit is not putting out the heat. For example right now, It is 17 degrees outside. I put my thermostat up to 90, not to get it that hot of course, but to get the temperature to rise. It is only reading 59 degrees! Last night it went down to 40 degrees. The unit...

Thermostat says heat , damper not opening and boiler not coming on [ 3 Answers ]

Thermostat is programed correctly for weekdays and weekends. Sometimes therms says heat but damper does not open and boiler does not come on. If I try to turn it on manually same thing happens nothing. At some point the boiler may come on when it feel like it. What could be the problem? National...

Heat pump auxiliary heat keeps coming on. [ 13 Answers ]

One of our 2 Ruud heat pump keeps cycling on auxiliary heat. The installer says there is nothing wrong, if so why is the other one working properly, plus in the summer it will not get below 76 degrees with that same unit. Freon is fine.

Thermostat Wiring -- Where to put "O" wire if I have no heat pump [ 1 Answers ]

I'm trying to replace an old Dayton thermostat (Model 2E137) with a newer Honeywell (either the 6300B or the 7400). I have a Bryant 80 furnace in the basement and a Bryant Quantum Plus 550A air con outside. The Dayton thermostat has wires going to six terminals: R, 4, Y, W, G, and O I know...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.