Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to connect cpvc to compression shut off valve
[ 4 Answers ]
I am at my wits end I know this is supposed to be an easy fix but I have been trying to cement the compression shut off valve to a cpvc pipe and it pops completely off after 5 hours of drying time as if there was no cement at all. Any suggestions its nw 1:30 am here and my main water is still off.
Gas line shut off valve dryer
[ 1 Answers ]
We just had our clothes dryer replaced and the installer (from Sears) stated that the gas shut off valve for the dryer was located too high. It is located a little above the top of the dryer. That's where the gas line was run for the dryer-it is about four feet off the floor and parallel to the...
Gas stove shut off valve
[ 1 Answers ]
I have a gas stove in my new apartment (I've never used one before.) there is a wall mounted shut-off valve above the stove. Do I turn this (valve) on/off every time I cook, or can I leave it on all the time?
Changed valve on Hotwater tank leads to low flow
[ 1 Answers ]
I have a 40 Gallon Natural GAZ "GIANT" hot water tank. The Cold water in valve was leaking so I changed the piece. I made sure that the everything was clear and clean and that the valve was a BI-Directional flow. The tubes are PEC and I crimped the O-rings into place and they are a GO. ...
Home Water Shut Off Valve
[ 3 Answers ]
Do you recommend shutting off the main house water shut off valve? We are leaving our southern California home for six months and living in our second home in Ohio. Our house is 30 years old with main water lines in a slab. A few homes in the neighborhood have experienced leaks in the slab. ... View more questions Search
|