Ask Experts Questions for FREE Help !
Ask
    bwclark1932's Avatar
    bwclark1932 Posts: 3, Reputation: 1
    New Member
     
    #1

    Dec 21, 2010, 09:07 AM
    How do you tell what type of well water tank you have?
    Is it on the tank?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #2

    Dec 21, 2010, 01:47 PM

    It is usually on the tank, but I see you are all set from another post so glad you are all fine, now!

    Mark

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replaced a hot water tank,water is not going to the pressure tank-the pump stays on [ 2 Answers ]

Replaced a hot water tank, turned the pump on and the water is bypassing the pressure tank. The pressure tank will not fill up and the pump remains on and will not shut off. We do get water though but needs to shut off the pump so it will not burn out. Any thoughts? Thank you Any ideas will...

What type of pump will work with out a pressurized holding tank for water supply? [ 3 Answers ]

I want to use a holding tank to supply fresh water for a flush and outside shower at my cottage in a bunk house. Is there a demand pump I can use instead of having a holding tank with a pressure switch? If so what is the pump called?

What type of ball valve would you fit in a domestic water tank [ 3 Answers ]

What type of ball valve would you fit in a domestic water tank in a loft and which should you not fit


View more questions Search