 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I am trying to change an old Honeywell thermostat for a programmable Horstmann DRT2unit . The old one has 3 wires Red, Blue & Yellow which go into terminals 1,2 & 3 respectively on the 5 terminal block. The Horstmann has 3 terminals NO, COM & NC. Can it be connected to the old wiring and if so...
I have a 1950's era hot water boiler using the baseboard style radiator. There is only one zone in the entire home. I would like to switch to a programmable style thermostat to better manage the heating in the house. Is there a way I can switch to a 24 volt thermostat using a relay or switch? ...
How do I change from 110v to 24 volts thermostat... I have a 3 zone heating systemsystem but only one is 110 volts
I have a baseboard hot water system with a gas boiler. Boiler is 6-7 years old. It has three zones with 3 separate pumps and thermostats. I checked the thermostat wires and they are 110 volts. Folks at the local hardware store I talked to were surprised with the 110 volts but suggested I could...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
